Service FAQs

The following are answers to some of the questions most frequently asked by Land Pride customers.

Kubota CE Attachments

Skid Hitch

Why are my implements lower hitch pins loose in the skid hitch lower lugs?
Answer

You will need to add bushings to take the excess room up. Please see your operators manual under spare bushings.

Related Product Pages
How heavy of an implement can you pick up?
Answer

You can lift 2,800 lbs. at 24" from implements' lower hitch pins.

Related Product Pages

Skid Tiller

Why is my unit making a clicking sound when it's out of the ground?
Answer

It's normal noise.  Being the tiller is bi-directional the tines have room to move to get into the right angle depending on which way the tiller is running.

Related Product Pages
Is there a certain direction I have to go with the tiller?
Answer

No, the SRT has a bi-directional motor. You can drive forward or backwards. You can run this unit as a reverse tine tiller or as a forward tine tiller.

Related Product Pages

Snow Pushers

My skid shoes are wearing uneven, what is causing that?
Answer

Your SSP is not level when pushing with it. You need to keep the skid shoes flat on the ground.

Related Product Pages
Do I need to run the unit in float?
Answer

Yes, not running in float will cause premature wear on the skid shoes.

Related Product Pages

Dozer Blades

Can I use my Dozer Blade for snow?
Answer

No you should not use you blade for snow.  There is not trip edge to protect the equipment.

Related Product Pages

Light Material Buckets

What type of material can I move with this bucket?
Answer

You can move snow, wood chips, silage, peat moss, etc.
Related Product Pages
What is the capacity of the Light Material Bucket?
Answer

The Struck capacity are 30.9, 35.4, & 40.4 cu. ft.
Related Product Pages

Trenchers

What widths of chain do you offer?
Answer

We offer 6”, 8”, & 10”.
Related Product Pages
What is the proper tension on the chain?
Answer

Measure the clearance between top of lower chain and bottom of chain guide.  The clearance should be maintained around 1 ½”.

Related Product Pages

Excavator Augers

Can I use these as SA also?
Answer

Yes you can order a skid steer mount and hose kit and make it a SA model.

Related Product Pages

Breakers

Why is the impact rate slowing down?
Answer

Check the temperature of the oil.  Your oil is probably over heating or the Viscosity is too low.

Related Product Pages
The hammer does not stop or has run-on?
Answer

There is a failure in the hammer control valve operation.  Check the hammer control valve in the carrier. 

Related Product Pages

Hopper Brooms

Do I have to take the hydraulic hoses loose to change the bristles?
Answer

No you do not.  You can change the bristles without removing a hydraulic line.

Related Product Pages
Can I use this on a High Flow machine?
Answer

Yes this unit has a diverter to take excess oil back to tank.

Related Product Pages

Tree Carriers

What is the maximum root ball capacity?
Answer

The maximum root ball is TC2536 is 36”, TC2542 is 42”, and TC2548 is 48”.

Related Product Pages

Cold Planers

How long do teeth last?
Answer

This will depend on the conditions you are in.  With the cut, material age, temperature, horse power, etc…

Related Product Pages
Do I have to replace all the teeth at the same time?
Answer

No the outer teeth will wear faster than the center.  Take the center teeth and move them to the outside and put new teeth in the center.

Related Product Pages

Loader Boom

What is the lift capacity of the loader boom?
Answer

The lift capacity is 6000 lbs.

Related Product Pages

Rippers

How deep will the shanks go?
Answer

You have 4 depth settings for the ripper.  You can go 2”, 4”, 6”, and 8” deep.

Related Product Pages

Road Saws

What is the recommended flow for this unit?
Answer

The minimum flow required is 30 GPM.

Related Product Pages

Silage Defacers

What is the RPM of the silage defacer?
Answer

The RPM varies by GPM from 160 RPM at 12 GPM to 335 RPM at 25 GPM. 
Related Product Pages

Tilt Hitches

The unit will not tilt. What is causing that?
Answer

Check unit for debris in the hitch.  Also check your Wear Pads the adjustment may be too tight.

Related Product Pages

Pages