FDR36 Series Grooming Mowers

FDR36 Series Grooming Mowers

Features

Note: Some feature photos may be represented by a similar model and not the specific model shown on this page.

Quick-Hitch Compatible

Our Quick-Hitch System allows you to quickly connect and disconnect from the implement - most without leaving the tractor seat. This is a real time saver when working on multiple projects.

Rear Discharge

The wide, even dispersal of grass leaves a fine thin layer directly behind the mower, vs. a possible windrow to the side. Keeps grass from blowing in unwanted areas. Easier to mow around objects.

Floating 3-Point

Top and bottom hitch points float up and down which allows the mower to float over uneven terrain.

Frame-over-Deck Design

Frame takes stress out of deck by supporting it.

Gearbox Warranty

5 Year Limited Gearbox Warranty demonstrates our confidence in the gearbox's quality and lasting performance.

Non-aligned Gauge Wheels

Rear wheels don't track behind the front wheels to reduce laying grass over.

Driveline Storage Hook

Keeps the driveline off the ground when not in use.

Features and Benefits PDF

Product Specs

Download Product Specifications PDF:

Warranty Information

Overall Unit and Driveline: One year Parts and Labor
Gearboxes: 5 Years Parts and Labor
Belt, Blades, Friction Disc in Slip Clutches & Tires: Considered Wear Items

 

Download Warranty PDF:

Product Manuals

Operator
Parts

Service FAQs

Frequently Asked Questions About This Product

Why is my mower leaving a trail of grass on the right hand side?
Answer

The issue is probably the amount of material that is being cut. The blades turn counter clockwise, so if you try to cut more material than the unit can handle, you will have a windrow of material build up on the right hand side.

What is needed to set my FDR series mower for mulching?
Answer

A set of mulching blades, no other attachments or equipment is required.

What do I need to replace my gauge wheel assembly air tire with a solid tire?
Answer

You will need the solid rubber tire (814-493C), two gauge wheel spacers (310-329D) and one spacer tube (310-328D) per gauge wheel assembly.

What could be causing the hub on my spindles to break?
Answer

Impact damage with foreign objects or the ground can cause the spindle housing/hub to break or blow apart.

Should the front of the mower run lower than the rear?
Answer

Yes. The grass is cut on the front side of the mower and not at the rear. This leaves a better and more consistent cut and aides in better material distribution.

My lower 3-point arms will not attach to the lower hitch points, how can I make it work?
Answer

The lower hitch points are designed to be adjustable. They adjust in and out for many tractor configurations. There are 2 bolts that hold the hitch plates in place, on is solid while the other one allows the hitch plates to pivot up and down for easier attachment.

How do you set the belt tension on this mower?
Answer

The belt tension is set with a spring and an eyebolt. Tighten or shorten the eyebolt to increase belt tension or loosen or lengthen the bolt to relieve tension. The correct tension is achieved when pressure is applied to the center of the longest run and belt is able to be pressed in about ½” from static position.

How do I remove the blades?
Answer

The blade bolts are rh threads and the best way to remove them is by using an air ratchet or gun. If that is not an option, you need to lock the blade in place with a block of wood. When reinstalling the blades, tighten the blade bolt to 55 lbs.

How do I remove the blade hub from my spindle assembly?
Answer

The blade hub is threaded onto the spindle shaft with right hand threads. It is not pressed onto the shaft. The hub will need to be removed in a counter clockwise fashion.

Do I leave my lower arm of the tractor in float when the mower is in use?
Answer

You can, but there is already some float built into the lower lugs of the unit.

Product Literature

Download product literature:

Co-Op Advertising

Product Videos