• FM41 Series Flail Mowers
  • FM41 Series Flail Mowers
  • FM41 Series Flail Mowers

FM41 Series Flail Mowers

FM41 Series Flail Mowers

Available Models



Land Pride's FM41 Series Flail Mower offers 3/16" deck material and utilizes a threaded rod to easily offset the hitch by nearly 8". The gearbox incorporates an over-running clutch that enables the rotor to swing free to a stop when the tractor PTO has been turned off. The 41 Series also offers cast and machined hammers and brush rake teeth to shred prunings and to provide a nice clean cut in grass. Thirteen adjustable brush rake teeth also keep clippings in the blade path for maximum mulching.

Features and Benefits

88” Cutting width A good cutting width for many applications.
3-Point screw type hitch can be offset 7 3/4” Left & right Easily offset the hitch for a closer cut alongside buildings, fences, roadsides and for getting under tree limbs.
ACME threads on offset ACME threads are deeper allowing for easy screwing adjustment.
One year gearbox warranty The gearbox is designed tough to withstand the rigors of flail mowing.
540 RPM cast iron gearbox with over-running clutch Enables the rotor to free swing to a stop when the tractor PTO has been turned off.
1/2” – 6” Cutting height Variable cutting heights for many uses. Lowest cutting height allows for scalping in grasses such as Bermuda prior to overseeding.
2” Cutting capacity Cut saplings when used in a rough setting.
Cast & machined hammer knives Cast & machined hammers are just right for chopping up prunings up to 2" thick, but will also groom grass in a very acceptable manner.
5 1/2” Rotor diameter Large rotor is able to take rough conditions.
Reverse rotor rotation Brings the cut material up and over which allows it to be dispersed more evenly.
High knife tip speed Knife tip speed of 9,805 fpm for cleaner cut.
Cat. 4 driveline Heavy-duty driveline matches up with HP range as well as potential conditions.
4 - 'B' Section belts 'B' Section belts have more surface to pulley contact and fits deeper in the groove.
3/16” Deck thickness Allows the mower to handle rough conditions.
Baffles on top inside of deck Keeps cut material from clumping together, ensuring an even distribution of clippings.
Height adjusting roller Rear height adjusting roller with greaseable bearings and tapered ends to prevent gouging during turns.
Standard scrapers on rear height adjusting roller Keeps roller clean for consistent cutting height.


Download Features and Benefits

Download features and benefits of this product here:  309-523f.pdf

Download Specifications

Download the Product Specifications here:  309-523s.pdf

Operator's Manual

Download a PDF of the Operator's Manual here:  309-523m.pdf

Parts Manual

Download the Parts Manual here:  309-100p.pdf


Overall Unit and Driveline: One year Parts and Labor
Gearbox: One year on all components.
Blades and Belts: Considered wear items.

See complete Warranty Statement below.

Download Complete Warranty

Download the full Product Warranty here:  309-523w.pdf

Frequently Asked Questions About This Product

What sort of cutting knives are available?
  • Duckfoot type – FM21 Series (Heavy enough to cut 1” material)
  • Fine Cut Knives – FM31 Series (Heavy enough to cut 1” material, but fine enough to groom a yard)
  • Hammer Knives – FM41 Series (Designed for chopping prunings up to 2” think, but can also groom grass in an acceptable manner)
What can cause my rotor to be out of balance?

Broken or missing knives. Make sure the replacement knifes are the same length as the others on the mower. This will keep the rotor rotation balanced.

What allows my cut material to be dispersed more evenly?

The reverse rotor rotation allows the unit to disperse material more evenly by bringing the cut material up and over. While the baffles inside the deck prevent clumping of material to ensure an even distribution.

Product Literature

Download product literature here:  lit_fm41.pdf