• HD35 Series Post Hole Diggers

HD35 Series Post Hole Diggers

HD35 Series Post Hole Diggers

Available Models

HD35

Description

The HD35 Series Post Hole Diggers are hydraulically driven and accommodate augers ranging from 6" to 24" in diameter. They are available with a bolt-on mount for mounting to the side of a bucket, on a tractor front-end loader, or with a boom for mounting to a category 1 or 2 three-point hitch. The HD35 series requires a hydraulic flow system capable of producing 10 to 25 GPM. The digging performance of the bucket mounted post hole digger can be improved in heavy hardened soil conditions by applying additional down pressure with the front-end loader. An optional hydraulic down pressure kit is available to improve the performance of the three-point mounted post hole diggers.

The ability to reverse the auger on hydraulic post hole diggers greatly reduces the strain on the auger and tractor when extracting the digger from the ground. The HD35 Series will deliver up to 1,605 ft.lbs of torque when industrial duty is preferred.

Features and Benefits

FEATURES BENEFITS
3-Point Cat. 1 or 2 Hitch Fits a wider variety of tractors by fitting Cat. 1 & 2.
Bucket Mount Option Easily bolt mounting plate to the side of the front loader bucket, and use the bucket to help push the auger into the ground
2 7/8” yoke tubing – schedule 40 pipe 3/16+ wall thickness for strength and durability.
3 1/2” Reinforced boom tubing 7/32” wall tubing for strength.
Auger flighting Constant thickness on 1/4" flighting vs. tapered.
Replaceable hardened steel points on auger Hardened points will last longer than non-hardened. Points can easily be replaced when worn or damaged. Cast steel auger fishtail tips.
2” Output shaft 2” tackles the torque loads that can be transmitted from hard ground. Fairly standard size for the industry, fits many competitive augers.
Hydraulic hose Standard on 3-point model, option on bucket mount due to distance varying on tractor models.
Auger Sizes 6”, 9”, 12”, 15”, 18” or 24”

Download Features and Benefits

Download features and benefits of this product here:  317-076f.pdf

Download Specifications

Download the Product Specifications here:  317-076s.pdf

Operator's Manual

Download a PDF of the Operator's Manual here:  317-076m.pdf

Parts Manual

Download the Parts Manual here:  317-048p.pdf

Warranty

Overall Frame: One year Parts and Labor
Auger: One year (somewhat considered a wear item)
Gearbox: 5 years on housing, gears and shafts
Hydraulic Motor: 5 years

See complete Warranty Statement below.

Download Complete Warranty

Download the full Product Warranty here:  317-076w.pdf

Frequently Asked Questions About This Product

Why won’t my auger go down into the ground?
Answer

There are many variables, but the most common is that the ground is hard, and requires extra weight. The optional down pressure kit will help in this condition.

Why does my HD turn slower than my PTO driven unit?
Answer

The HD unit has a different gear ratio, but it has more torque than the PD model. The RPMs of the HD is determined by GPM and pressure.

What should I do if my auger is turning the wrong direction?
Answer

Hydraulic hoses are reversed. Switch the hydraulic hoses at the outlet.

What if I want to dig deeper than my 48” auger will allow?
Answer

Land Pride offers two auger extensions for increased hole depth.

  • 7” Auger Extension
  • 14” Auger Extension
My auger has reduced turning speed, what could be causing it?
Answer

Hydraulic oil flow could be restricted. Check flow meter, remove any dirt particles in fittings and replace couplers. Replace oil filter.

How many lbs. of down force does the optional down pressure kit add to the unit?
Answer

Around 500 lbs of down force is added when the kit is installed.

Can I use a grade 8 bolt to replace the shear pin?
Answer

No. Damage to the unit will occur if a higher grade bolt is used in place of the original.

Can I replace the teeth?
Answer

Yes, all teeth supplied by Land Pride are replaceable.

Product Literature

Download product literature here:  lit_hd35.pdf